'Seas' the day

In my last couple of posts I've shared cards I made after creating a variety of colorful card stock panels with Distress Oxide inks. On some of the cards I used the Distress Oxide panels as backgrounds, and on others I used the panels to die cut images. On today's cards, I did both. These also happen to be my favorite cards of the bunch.

On the mermaid card the background is one of the Distress Oxide panels, embossed with an underwater-themed embossing folder and then spritzed with a shimmer mist. I stamped the mermaid tail on another panel and then die cut it, along with a few tiny seashells. I used other Distress Oxide panels to die cut some coral, and I also used those panels to cut out larger layered seashells for two other cards (the white card above and one further down this post).

The mermaid tail needed some sparkle, so I used a Stardust Gelly Roll to color some of the scales and to add lines on the fluke. I finished the card by adding a sentiment (also stamped on a piece of Distress Oxide panel for perfect coordination) and a handful of sequins.

For the second card, I went more clean and simple. I spritzed a white card base with shimmer mist and adhered a die-cut white fishing net on top. I used three of the die-cut layered seashells and adhered them to the card with foam tape. When I cut out the seashells, I used different areas of the Distress Oxide panel (e.g., darker areas or places where one color was more prominent) for the different layers, which I think adds a lot of depth and realism. I finished this card with a sentiment and a few pearls.

The third card is kind of a mix of the first two: I focused on the seashells, like the second card, but also embossed the background, like the first one. (The embossing folder is technically going sideways on this card, but I don't think it matters too much. It still evokes the feeling and movement of water.)

I also spritzed this card with shimmer mist -- it reminds me of the sun sparkling on water. I finished this card with a sentiment and a few pearls.

My craft room is still out of commission while we're working on the basement. But I've moved some supplies to the dining room table so I can still do a bit of card making. I'll probably be posting just once a week for a while since I won't have as many cards to share. Thanks for stopping by!

Wild and precious life

Today I've got a quick post to share another card featuring Distress Oxide inks. In my last post I mentioned that I had made several panels using Distress Oxide inks, and I shared a couple of cards where I used the panels as backgrounds. This time I used the panels for the die-cut images on the card.

I love this quote from Mary Oliver, and I think it's perfect for a birthday card. I also like to pair it with images from nature, and this time I chose a dragonfly and leaves.

The pink/purple Distress Oxide panel seemed perfect for a dragonfly. This dragonfly is from a Tim Holtz die set, and it has three layers. Normally I would cut each layer from a different color, but in this instance I cut them all from the same panel. You do get some natural color variation, but the different layers don't stand out as much. For the leaves, which are also layered, I cut the outlines from a part of the panel that was slightly darker, and the backing layer is a little lighter.

For the card base I used Crumb Cake card stock stamped with the Circular Grid Bold Prints stamp from Hero Arts. It reminds me of the rings of a tree. The leaves are glued directly to the card base, and the sentiment piece and dragonfly are adhered with foam tape. I finished the card with a few clear droplets.

I will have one more post featuring the Distress Oxide panels I created, so stay tuned (spoiler alert: there will be an underwater/beach theme). Thanks for stopping by!

Backgrounds with Distress Oxide inks

I've been wanting to do more with my Distress Oxide inks lately. So I bought a few more colors to add to my collection, I stamped some swatch cards, and of course, best of all, I spent some time playing. I cut a couple sheets of white card stock into quarters and experimented by blending the inks on the card stock and also by "smooshing" the ink -- applying ink to my glass mat, spritzing with water, and then placing the paper in the wet ink to pick up the color. After the panels were dry, I got to work making cards. Today I'm sharing two of the finished cards; I'll share the others in future posts.

Note: I just realized I didn't make any supply notes for these cards, so I don't have specific product names. If you have questions about the supplies I used, leave me a comment and I'll do my best to get the info for you.

With both of these cards, I used the Distress Oxide panels as card backgrounds. For the first card (left) I used blues and purples with the ink smooshing technique. I think I overworked the background a little because the colors are more blended together than I intended. But it's still pretty! I applied light blue stencil butter through a butterfly stencil to add the focal images. When that was dry I stamped the Xs along the right and left edges and attached the panel to a black card base. I added a black die-cut "celebrate" for the sentiment and finished the card with a few sparkling clear sequins.

For the second card I applied the Distress Oxide inks on the card stock using bending tools. I don't do a lot of ink blending, so I'm not very good at getting a seamless transition between colors. Oh, well. After I did the blending, I spritzed the panel with water, let that dry, and then used the same ink colors to stamp a few doodle-type images. Then I stamped some other images and small words using black ink. Finally I used a clear paste and a stencil to add some subtle texture.

When everything was dry, I added a die-cut circular "wish" sentiment and adhered the panel to a black card base. Again, I finished the card with a few sparkling clear sequins. I really like how all the different elements of this card came together.

Thanks for stopping by!

August Christmas cards: Gel print kit

I didn't think I was going to be able to make any Christmas cards this month. We are doing some work on our house, so my craft room is filled with boxes of random stuff, and I can barely get in the room. But as luck would have it, I entered a drawing on Instagram and won a Christmas card gel printing kit from Gelli Arts. Almost everything I needed was included in the kit -- even a gel plate, brayer, and some paint. I just needed my scissors/trimmer and adhesive. I sat down to create at the coffee table, and here are my finished cards:

The kit was designed to make two cards and ornaments (the white card bases in the top row). I love the idea of including an ornament right on the card! I added a few extra card bases and twine so I could make five cards total. And of course I had to add a few sequins on the tree ornaments. :) I'm still debating if I should add some sparkle to the star ornaments. Maybe I'll take them off the cards and add some spatter. What do you think?

Thanks for stopping by!

Using up some scraps

After I made my January Christmas cards, I had a bunch of skinny strips leftover from the alcohol ink panels. I don't usually save those tiny strips, but these were too pretty to just toss. Instead I used a double-sided adhesive sheet, lined up the strips, and created a couple of striped panels. I finally turned those panels into two birthday cards:

One of the striped panels was almost the size of an A2 card so I used it as a background (card on the left). I cut the Birthday Message Cover Plate die (Hero Arts) out of holographic card stock, adhered it over the background and attached it to a white card base.

I used foam tape to add a sentiment strip near the bottom of the card front. Then I finished off the card with several blue rhinestones clustered around the sentiment strip.

For the second striped panel, which was smaller than the first, I die cut two large butterflies using the Detailed Butterflies, Mini dies (Sizzix - Tim Holtz). I cut the outlines for those butterflies out of black card stock and glued the layers together. I also cut out some tiny butterflies using the Intricate Mini Butterflies die (Memory Box). I arranged the butterflies around the stamped sentiment on a light purple card base and adhered them using liquid glue (and foam tape behind the wings of the large butterflies). I added a strip of the alcohol ink panel and a twine bow toward the bottom of the card front and finished with a cascade of droplets.

Thanks for stopping by!

Blue birthdays

I am always in need of more birthday cards. I try to keep a good-sized stash on hand so I can choose a card that fits the recipient. So when I sat down to turn some backgrounds into cards, I knew birthday cards were the way to go.

For the cards I'm sharing today, both of the backgrounds were foiled using stencils from The Crafter's Workshop along with Transfer Gel Duo and Deco Foil from Therm O Web. 

To coordinate with the green numbers on this background, I die cut three balloons using two different shades of green card stock. I taped a piece of white crochet thread to the back of each balloon and then attached the balloons to the panel. I wrapped each piece of string to the back of the panel and secured them before adhering the panel to a white card base. I used a white paint pen to add details to the balloons and finished the card with a sentiment strip and blue rhinestones. I had the perfect sentiment for inside the card: "Age is just a number (in your case a really high one)." 

The foil on this panel is pearlescent, so I chose light blue foil card stock for the accents. I used the A2 Thin Frame Cover Plate die (Taylored Expressions) to cut out the frame and the Big Birthday die (Honey Bee Stamps) for the sentiment. I cut the shadow die for the sentiment out of vellum to help it stand out a little more. The panel is adhered to a white card base, and I decided to skip the embellishments because there's already a lot of shine happening on this card.

Thanks for stopping by!